Blow Molding Printing Heat PETG Heat Shrink Film For Shrinkable Sleeve

Supporting Printing Heat PETG Heat Shrink Film For Shrinkable Sleeve Application

PETG heat shrink film is a polyester film made from stretched polyethylene terephalate and used for its high tensile strength,chemical and dimensional stability,transparency,reflectivity,gas and aroma barrier properties,and electrical insluation.

1. Equal mechanical properties in MD and TD

2. Good temperature stablility.

3. Excellent puncture resistance.

Description

1. Rigid PETG shrink film for Shrink Sleeve Label application.

2. Oriented in Transverse Direction,High shrinkage under 80ºC/10sec. TD Shrinkage>68%, MD Shrinkage< 0%,Low Shrinkage haze.

3. Recommended for using in steam shrink tunnels.

Features

1.   Low shrink-initiation temperature requires minimal shrink tunnel length for energy savings & high-output line speed
2.   Medium to high shrinkage properties
3.   Simple & multiple contours, symmetrical shaped configurations allow for flexibility in container shape and design
4.   Suitable for gravure, flexographic & rotary offset printing
5.   Runs on existing printing equipment using conventional inks
6.   Works with heat-bar, solvent, hot-melt adhesive & laser seaming
7.   Use in steam or hot air shrink tunnels
8.   Excellent processability during printing & shrinking (smooth flat seams)
9.   No de-lamination
10. High-impact strength
11. Gloss/gloss surface finish
12. Clear, transparent film
13. Attractive total system cost due to high-speed labeling, low scrap rate, quick changeover, and wide-web printing